safety depends on you carrying out the following checks before
every journey.
-
Set the harness correctly and to the correct shoulder
height (38-44)!
-
Ensure the harness straps are not twisted!
-
Check the harness is set for the clothing and not loose!
-
Check the harness is secure with the buckle and shoulder strap
connectors latched together and harness tension is correct
(43,44)!
-
Check the car seat is facing rearwards in the vehicle and is fully
reclined (28)!
IMPORTANT! Misusing your child car seat will reduce the
protection and safety you offer your child.
FORWARD FACING FOR GROUP 1
(9kg to 18kg / approx. 9 months to 4 years)
IMPORTANT! DO NOT USE FORWARD FACING BEFORE THE
CHILD'S WEIGHT EXCEEDS 9 KG.
Firstly you must install the car seat base into your vehicle using
the vehicle seat belt or ISOFIX points. See section 'Installing the
base - using the vehicle seat belt' or section 'Installing the
base - using the ISOFIX points'.
You must also ensure that the harness and headrest is set
correctly for your child, to do this see sections 'Headrest and
Safety Harness Adjustment' and 'Harness Tension and Adjust
ment'.
INSTALLING THE CAR SEAT ONTO THE BASE
Place the car seat onto the car seat base facing in the direction of
travel and press the car seat down until you hear a "click" (13/28).
The car seat can be set in any of its 4 recline positions, to recline
the car seat see section "RECLINING YOUR CAR SEAT".
To remove the car seat from the base, simultaneously press the
car seat release button (Y) while lifting the car seat up out of the
base (18/32).
INSTALLING YOUR CHILD IN THE CAR SEAT
GB
35