Operation; Main Unit Operation; Auto Operation - Sharp FU-W28E Manuel D'utilisation

OPERATION

MAIN UNIT OPERATION

Fan Speed Indicator Lights
Plasmacluster Indicator Light
Plasmacluster ON/OFF Indicator Light

AUTO operation

The fan speed is automatically switched (MEDIUM,
LOW) depending on the amount of impurities in the air.
The sensors detect the impurities for efficient air purifi-
cation.
ION SHOWER operation
By continuously discharging strong airflow for 15 min-
utes the unit effectively removes airborne dust, pol-
len, mold and allergens from the air as they are drawn
through the filter system.
• When the operation finished, the unit will return to the
AUTO operation.
POLLEN mode operation
The unit will operate at HIGH* fan speed for 10 min-
u t e s , t h e n w i l l a l t e r n a t e b e t w e e n MEDIUM and
HIGH* for 20 minutes.
10 minutes: HIGH fan speed
20 minutes: MEDIUM fan speed
20 minutes: HIGH fan speed
Power ON/OFF Button
• Press to start operation (short beep) and stop operation (long
beep)
• Plasmacluster Indicator Light and Fan Speed Indicator Light
turn on/off.
• Unless the power cord has been unplugged, the operations
starts in the previous mode it was operated in.
Fan Speed Button
• The operation mode can be switched as below.
E-8
MAX operation
The unit will operate at a
fan speed of MAX.
MEDIUM operation
The unit will operate at a
fan speed of MEDIUM.
SILENT operation
T h e u n i t w i l l o p e r a t e
quietly using minimal air
intake.
* HIGH fan speed is an intermedi-
ate speed between MEDIUM
and MAX.
* LOW fan speed is an intermedi-
ate speed between SILENT and
MEDIUM.