Before First Use - Reer Rigi Digital Notice D'utilisation

1
Only the supplied adapter (5V DC/500 mA) may be used. We recommend also
inserting NiMH batteries to ensure that the units remain operational in case of a
power failure. These will be automatically charged when the unit is connected to
a power supply.
NOTE: Only use rechargeable NiMH AAA batteries! Never use non-rechargeable batteries
in the baby monitor. Using unsuitable battery types poses an explosion hazard!
2
3
If the highly sensitive microphone on the baby unit detects a sound, the unit will
begin transmitting to the parent unit. When noise is received, the status LED on
the parent unit begins to flash orange.
4
When your child is quiet and the baby unit does not receive any noise, the device
automatically switches to standby mode (ECO mode). When ECO mode is swit-
ched on, the baby unit does not emit any radiation in standby mode. The baby
unit starts to send again only when noises are received.
TIP
You can attach the units to your belt using the belt clip, or hang them on a wall using
a suitable fastening material.
NOTE: The parent unit and the baby unit can also be optionally operated with three NiMH
batteries (the cells for the parent unit included in delivery).

Before first use

To switch on the devices, press and
hold the on / off button for 2 seconds.
The status LED on the baby and
parent unit lights up green. The two
devices automatically connect.
GB
17