Pioneer DEH-X6900BT Mode D'emploi page 4

Remote Control
/
SRC (source)
Frequently used operations
The available buttons vary depending on the unit.
Purpose
Turn on the power* Press SRC/OFF to turn on
the power.
Press and hold SRC/OFF to
turn off the power.
Adjust the volume Turn the M.C. dial.
Select a source Press SRC/OFF repeatedly.
Change the display Press DISP repeatedly.
information
Return to the previous Press BAND/
display/list
Return to the normal display Press and hold BAND/
from the menu
Answering a call Press
Ending a call Press
* When this unit's blue/white lead is connected to the vehicle's auto-antenna relay control terminal,
the vehicle's antenna extends when this unit's source is turned on. To retract the antenna, turn the
source off.
4
En
VOLUME +/–
MUTE
DISP (display)
Operation
Head Unit Remote Control
Press SRC to turn on the
power.
Press and hold SRC to turn
off the power.
Press VOLUME + or –.
Press MUTE to mute the
unit. Press again to unmute.
Press SRC repeatedly.
Press DISP repeatedly.
. Press / to select the
next/previous folder.
.
–
. Press .
. Press .
Display indication
Indication Description
Appears when a lower tier of the menu or folder exists.
Appears when a Bluetooth telephone is connected to this unit by HFP
(Hands Free Profile) (page 8) and flashes while the telephone is on hold.
Appears when a Bluetooth audio player is connected to this unit by A2DP
(Advanced Audio Distribution Profile) (page 8).
Appears when the
Appears when the sound retriever function is set (page 15).
Appears when random/shuffle play is set (except when BT AUDIO is
selected as the source).
Appears when repeat play is set (except when BT AUDIO is selected as the
source).
Appears when the iPod control function is set (page 8).
Appears when a Bluetooth connection is made (page 8).
Detaching the front panel
Detach the front panel to prevent theft. Remove any cables and devices attached to the
front panel and turn off the unit before detaching it.
Detach
Important
• Avoid subjecting the front panel to excessive shock.
• Keep the front panel out of direct sunlight and high temperatures.
• Always store the detached front panel in a protective case or bag.
Resetting the microprocessor
The microprocessor must be reset in the following situations:
– Before using this unit for the first time after installation
button is pressed.
Attach