Electrolux ENS8TE19S Notice D'utilisation page 13

Masquer les pouces Voir aussi pour ENS8TE19S:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

To reassemble:
1. Pull out the rails.
2. Place the rear part of the drawer (1)
on the rails.
1
3. Keep the front of the drawer (2) lifted
up while pushing the drawer in.
4. Press the front part of the drawer
downwards.
5.4 Humidity control
The glass shelf incorporates a device
with slits (adjustable by means of a
sliding lever), which makes it possible to
regulate the humidity in the vegetable
drawer(s).
The position of the humidity control
depends on the type and on the amount
of fruits and vegetables:
• Slots closed: recommended when
there is a small amount of fruits and
vegetables. In this way, the natural
moisture content in fruits and
vegetables is preserved longer.
• Slots opened: recommended when
there is a big amount of fruits and
vegetables. In this way, more air
circulation results in a lower air
moisture.
5.5 DYNAMICAIR
2
The refrigerator compartment is
equipped with a device that allows rapid
cooling of foods and keeps more uniform
temperature in the compartment.
This device activates automatically when
needed.
Pull out the drawer again
and check if it is placed
correctly on both rear and
front hooks.
ENGLISH
13

Publicité

Table des Matières
loading

Table des Matières