Operation - Electrolux ST246F Notice D'utilisation

Masquer les pouces Voir aussi pour ST246F:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

76
www.electrolux.com

4. OPERATION

4.1 Control panel
1. Temperature indicator
2. Super Freeze indicator
4.2 Switching on
Insert the plug into the wall socket.
4.3 Switching off
To turn off the appliance, remove the
plug from the power socket.
4.4 Temperature regulation
The default set temperature
for the fridge compartment is
4°C.
To set the temperature, press the control
button repeatedly until you reach the
desired temperature.
Choose the setting keeping in mind that
the temperature inside the appliance
depends on:
• room temperature,
• frequency of opening the door,
• quantity of food stored,
• appliance location.
A medium setting is generally the most
suitable one.
1
1
°C
8
6
4
2
3sec
3
3
3. Control button
4.5 Super Freeze function
The Super Freeze is used to perform
pre-freezing and fast freezing in
sequence of Freezer compartment. This
function accelerates the freezing of fresh
food and, at the same time, protects
foodstuffs already stored from
undesirable warming.
To activate the Super Freeze function,
press and hold the Control button for 3
seconds. The Super Freeze indicator
flashes.
This function stops automatically after 52
hours.
You can deactivate the Super Freeze
function before its automatic end by
pressing and holding the Control button
for 3 seconds. The Super Freeze
indicator turns off.
2
2
To freeze fresh food activate
the Super Freeze function at
least 24 hours before placing
the food to complete pre-
freezing.

Publicité

Table des Matières
loading

Table des Matières