Medisana 88934 Mode D'emploi page 24

88934_MCC_WEST_Final_korrig.qxd:Massagesitz
GB
3 Operating
16
a bar diagram and the pulse symbol for the type of massage (Waves /
Kneading / Tapping / Pulsate) being currently used at the bottom left.
The set programme is repeated until the 15 minute operating time has
elapsed. Then the built-in timer switches the device off automatically.
• Function button
You can choose between high, medium and low for the level of intensity. The
medium intensity level is always set when the device is switched on. Press
to select the massage intensity (high - medium - low).
• Function button
Press to switch on the heating
rately or combined with massage function. When the heating is used sepa-
rately, the background lighting in the display
massage and heating are used together, it lights up orange. The lower back
and waist area are pleasantly warmed up. Press
again.
02.12.2010 17:00 Uhr
(Massage intensity):
(Heating on/off):
. The heat function can operate sepa-
Seite 16
lights up red, when the
to switch the heating off