Num'axes TLK1038 Guide D'utilisation page 12

On/Off
Press the "On / Off" button for approximately 4 seconds to switch on the walkie-talkie.
The LED around the PTT button flashes blue and pink. You hear a short beep and / or a vibration
depending on the setting chosen.
The channel number appears on the screen (example: CH 01).
Press the "On / Off" button for approximately 4 seconds to switch off the walkie-talkie.
The LED around the PTT button goes out
Volume adjustment
Walkie-talkie on, press the "+" button to increase the volume or press the "-" button to decrease the
volume.
Press the "PTT" button to confirm.
Channel selection
Walkie-talkie on, press the "Mode" button once then press the "+" button or the "-" button to increase the
channel number or press the "-" button to decrease the channel number.
If "0" appears on the screen: vibrator deactivated; If "1" appears on the screen: vibrator activated.
Press the "PTT" button to confirm.
Frequency
PMR channel
1 446.00625
2 446.01875
3 446.03125
4 446.04375
5 446.05625
6 446.06875
7 446.08125
8 446.09375
9 446.10625
10 446.11875
11 446.13125
12 446.14375
13 446.15625
14 446.16875
15 446.18125
16 446.19375
Vibration function
Walkie-talkie on, press the « Mode » button twice then press the « + » button or the « - » button to activate
or desactivate the vibrator.
If « 0 » appears on the screen: vibrator desactivatd ; If « 1 » appears on the screen: vibrator activated.
Press the « PTT » button to confirm.
Talkie-walkie TLK1038 – indice B
Channel
allocation
(MHz)
113-128
129-144
145-160
161-176
177-192
1-16 Cf table opposite
17-32 CTCSS 114.8
33-48 CTCSS 192.8
49-64 DCS 223
65-80 DCS 343
81-96 DCS 506
97-112 DCS 627
Scramble
Compand
Vox & compand
Vox & scramble
Vox
SC Scan 1-16
Particularity
12/36