Criteria For The Installation Location; Installing The Appliance; Preparing The Appliance For The First Time; Connecting The Appliance To The Electricity Supply - Blaupunkt 5CN2 Série Guide D'utilisation

Equipment and accessories
¡
Installation material
¡
Installation instructions
¡
User manual
¡
Customer service directory
¡
Warranty enclosure
¡
Energy label
¡
Information on energy consump-
¡
tion and noises
4.2 Criteria for the installation
location
WARNING
Risk of explosion!
If the appliance is in a space that is
too small, a leak in the refrigeration
circuit may result in a flammable mix-
ture of gas and air.
Only install the appliance in a
▶
space with a volume of at least
3
1 m per 8 g refrigerant. The
volume of refrigerant is indicated
on the rating plate. → Fig.
The weight of the appliance ex works
may be up to 35 kg depending on
the model.
The subfloor must be sufficiently
stable to bear the weight of the appli-
ance.
Permitted room temperature
The permitted room temperature de-
pends on the appliance's climate
class.
The climate class can be found on
the rating plate. → Fig.
Climate Permitted room tem-
class perature
SN 10 °C to 32 °C
N 16 °C to 32 °C
1
Depending on the appliance specifications
2
Not in all countries
1
2
/
1
4
/
1
4
Installation and connection en
Climate Permitted room tem-
class perature
ST 16 °C to 38 °C
T 16 °C to 43 °C
The appliance is fully functional within
the permitted room temperature.
If an appliance with climate class SN
is operated at colder room temperat-
ures, the appliance will not be dam-
aged up to a room temperature of
5 °C.
Built-under
Attachment under certain worktops,
e.g. stone, glass or stainless steel, is
frequently not possible. You can or-
der accessories from customer ser-
vice for installation on the side walls.
→ "Customer Service", Page 36
4.3 Installing the appliance
Install the appliance in accordance
▶
with the enclosed installation in-
structions.
4.4 Preparing the appliance
for the first time
Remove the informative material.
1.
Remove the protective foil and
2.
transit bolts, e.g. remove the ad-
hesive strips and carton.
Clean the appliance for the first
3.
time. → Page 31
4.5 Connecting the appliance
to the electricity supply
Insert the mains plug of the appli-
1.
ance's power cable in a socket
nearby.
27