Basic Operations; Pairing With A Bluetooth Device; Connecting Rear View Camera; Updating The Firmware - Sony XAV-AX8000 Mode D'emploi

 Sources and Settings select keys
Changes the source or make various settings.
Flick to select the setting icon and other icons.
Touch the source icon you want to select.
Android
Auto
SXM
USB
 Sound select keys
Changes the sound.

(EXTRA BASS)
Changes the EXTRA BASS setting.

(EQ10/Subwoofer)
Changes the EQ10/Subwoofer setting.

(monitor off)
Turns off the monitor. When the monitor is
turned off, touch any part of the display to turn it
back on.
Apple
Radio
CarPlay
BT Audio Phone
Rear
Settings
Camera

Basic Operations

Pairing with a BLUETOOTH Device

When connecting a BLUETOOTH device for the first
time, mutual registration (called "pairing") is
required. Pairing enables this unit and other devices
to recognize each other.
1
Press HOME, then touch [Settings] 
[Bluetooth]  [Bluetooth Connection]  [ON]
 [Pairing].
flashes while the unit is in pairing standby
mode.
2
Perform pairing on the BLUETOOTH device
so it detects this unit.
3
Select your model name shown on the
display of the BLUETOOTH device*.
When pairing is made,
* If passkey input is required on the BLUETOOTH device,
input [0000].

Connecting Rear View Camera

By connecting the optional rear view camera to the
CAMERA IN terminal, you can display the picture
from the rear view camera. For details, see
"Connection/Installation" (page 11).
To display the picture from the rear view
camera
Press HOME, then touch [Rear Camera].
Canceling the Demonstration
Mode
1
Press HOME, then touch [Settings].
2
Touch [General], then touch [Demo] to set to
[OFF].
3
To exit the setup menu, touch
twice.

Updating the Firmware

To update the firmware, visit the support site on the
back cover, then follow the online instructions.
Note
During the update, do not remove the USB device.
stays lit.
(back)
7
GB