Specifications
MODEL
WEIGHT
HEIGHT WIDTH LEnGTH
DPD3000IC
83.6 lbs
26.5"
* Maximum PSI and GPM ratings determined in accordance with the Pressure Washers Manufacturers Association (PWMA)
standard PW101
** Horsepower rating (shown as maximum output @ 3600 rpm) is in accordance with SAE J1349 for Net HP and SAE J1995 for Gross HP .
Actual engine power will be lower. Engine power depends on the application, operating speed, operating conditions and other variables.
Definitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death
or serious injury.
WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in death
or serious injury.
CAUTION: Indicates a potentially hazardous
situation which, if not avoided, may result in minor
or moderate injury.
CAUTION: Used without the safety alert symbol
indicates a potentially hazardous situation which, if
not avoided, may result in property damage.
PSI
MAx*
23"
40"
3000
(20384 kPa)
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT
THIS OR ANY D
1-800-4-D
Important Safety Instructions
this instruction manual and the engine instruction manual for safety,
operation and maintenance instructions.
always be followed, including the following:
1. Read all instructions before using the product.
2. To reduce the risk of injury, close supervision is necessary when
3. Know how to stop the product and bleed pressures quickly. Be
4. Stay alert–watch what you are doing.
5. Do not operate the product when fatigued or under the influence
6. Keep operating area clear of all persons.
3
AVERAGE
GPM MAx*
OPERATInG
PSI
2750
2.8
(10.6 L/min)
(18961 kPa)
WALT TOOL, CALL US TOLL FREE AT:
e
WALT (1-800-433-9258)
e
WARNING: Do not operate this unit until you read and understand
WARNING: When using this product basic precautions should
a product is used near children.
thoroughly familiar with the controls.
of alcohol or drugs.
AVERAGE
EnGInE
OPERATInG
GPM
2.7
D
WALT
e
(10.3 L/min)
196 cc OHV,
5.5 Net HP, 6.5
Gross HP **