ADEUNIS Sigfox Smart Building MOTION Guide Utilisateur page 54

Sigfox Smart Building MOTION - Guide utilisateur / User guide version V1.0.1
Procedure to follow to program its registers according to the chosen mode.
FR
EN
A reading every X
I divide the X value
by 2 and I indicate it
S321 register
I save each reading
I indicate 1 in my S320
I want to maximize
my frame to minimize
the number of
transmissions
I indicate the number
of readings that I want
in my frame in my
register S301 (2 being
the maximum possible
in Sigfox without losing
Which mode do I want my device in?
Periodic
What period do I want between each reading?
seconds
in the
When do I save the information?
register
When will my frame be sent?
data)
DISTRIBUTED BY TEXIM EUROPE
Periodic
+
Alarm
A reading every X
seconds
I divide the X value
by 2 and I indicate it
in the
S321 register
I want to scan regularly
for my alarm but I need
to save the information
every Y time
I indicate the Y value in
my S320 register
I want to maximize
my frame to minimize
the number of
transmissions
I indicate the number
of readings that I want
in my frame in my
register S301 (2 being
the maximum possible
in Sigfox without losing
data)
set my thresholds S330
to S334 for temperature
and S340 to S344 for
humidity
Alarm on
exceeding
threshold
A reading every X
seconds
I divide the X value
by 2 and I indicate it
in the
S321 register
In alarm mode I do
not need to save the
information
I do not need to enter
a value in the S320
register
My frame is sent
when my threshold is
exceeded
I indicate 0 in my S301
register to disable the
periodic mode
I set my thresholds
S330 to S334 for
temperature and S340
to S344 for humidity
Page 54 of 83