Publicité
Les langues disponibles
Les langues disponibles
Door seal
•
Dry the door seal after each washing with an
absorbent cotton cloth; make sure that the door
seal is completely dry before closing the door of
the empty washing machine.
•
Check the condition of the door seal periodically.
REMAINING MOISTURE CONTENT OF THE LAUNDRY
AFTER SPINNING
The degree of moisture remaining in the laundry
after spinning mainly depends on the fabric type, the
selected programme and spin speed.
The lowest remaining moisture content can be
achieved using the wash programme referred to by
the Energy Label, with maximum spin speed. This
programme is marked in the separate programme
chart as "Reference programme for the Energy Label".
Below a survey of the remaining moisture content
(in %) related to the various spin-drying efficiency
classes.
TRANSPORT AND HANDLING
Never lift the appliance by the worktop (if available)
when transporting.
1. Pull out the mains plug.
2. Turn off the tap.
3. Check that machine door and detergent dispenser
are properly closed.
ACCESSORIES
For some freestanding models, you can obtain via our
After-Sales Service or your specialist dealer:
•
A Pedestal Drawer which can be installed
beneath your washing machine. It raises your
machine to allow for more comfortable loading and
unloading, as you now no longer need to bend as
far to access the unit. Furthermore, it offers a great
space-management tool and storage solution.
•
A Stacking Kit, by which your dryer can be fixed
on top of your washing machine.
AFTER-SALES SERVICE
Before contacting After-Sales Service:
1. Try to remedy the problem yourself (see
"Troubleshooting Guide").
2. Restart the programme to check whether the
problem has solved itself.
3. If the washing machine continues to function
incorrectly, call After-Sales Service.
Specify:
•
The nature of the problem.
•
The exact model of the washing machine.
•
The service code (number after the word
SERVICE).
Filter
•
Check and clean the filter regularly, at least two or
three times a year (see "Draining Residual Water/
Cleaning The Filter").
Do not use detergents containing solvents,
scouring powder, glass or general purpose
cleaners, and flammable fluids. They may harm the
plastic surfaces or other parts.
Spin-drying
efficiency class
A (= most efficient)
B
C
D
E
4. Disconnect the inlet and drain hoses.
5. Eliminate all water from the hoses and from the
appliance (see "Draining Residual Water/Cleaning
The Filter").
6. Fit the transport bolts (obligatory).
•
A Stacking Kit Shelf, by which your dryer can
be fixed on top of your washing machine to save
space and to facilitate loading and unloading your
dryer in that high position.
•
A Cover Panel Kit, by which your washing
machine can be built under a continuous kitchen
worktop, for example. Check with our After-Sales
Service or your specialist dealer if this is possible
for your washing machine model.
The After-Sales Service sticker can be found
inside the door.
•
Your full address.
•
Your telephone number and area code. As a
priority, you should contact the After-Sales Service
of the retailer who supplied you with the washing
machine.
Manufacturer:
Whirlpool Europe s.r.l.
Viale Guido Borghi 27
21025 Comerio (VA)
Italy
EN 7
Remaining moisture
content in %
less than 45
45 or more, but less than 54
54 or more, but less than 63
63 or more, but less than 72
72 or more, but less than 81
Publicité
