Publicité
Les langues disponibles
Les langues disponibles
Comes with:
ECO-STRIPPER
Blade 210 x 60 x 1 mm
Blade cover
Tool kit
Ear protectors
Safety gloves
Operation manual
Always wear ear protectors!
Use this machine only
as instructed in this operating manual
with the machine in perfect working order.
03/2013
ECO-STRIPPER, #013993
1.0 Technical Data
Power supply . . . . . . . . . . . . . . . . . . . . . . . . .230 V AC (110 V)
Power consumption . . . . . . . . .2.000 W, 10 A (2000 W, 19,2 A)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .with current limitor
Number of strokes . . . . . . . . . . . . . . . . . . . . .6.300 strokes/min
Sound pressure level . . . . . . . . . . . . . . . . . . . . . . . . . .88 dB(A)
Sound energy level . . . . . . . . . . . . . . . . . . . . . . . . . .101 dB(A)
Hand/Arm-Vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 m/s
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 kg
2.0
Declaration of Conformity
We declare under our sole responsibility that this product is in con-
formity with the following standards of standardization documents:
DIN EN 1037, EN ISO 12100, DIN EN 60204-1, DIN EN 60745-1,
DIN EN 55014-1, DIN EN 55014-2
according to the provisions of the: 2006/42/EC, 2004/108/EC,
2006/95/EC.
Dipl.-Ing. (FH) Dieter Hammel
Authorised to issue this declaration and for the
gathering of the technical documentation.
07.04.2015
i.V.
WOLFF GmbH & Co. KG | D-74360 Ilsfeld | Ungerhalde 1
3.0 Safety instructions
Disconnect the power supply before any maintenance is carried
out. Use only the recommended blades and ensure it is sharp
before starting.
Maintenance should be undertaken only by qualified personnel.
Use only genuine WOLFF spare parts.
See supplementary sheet "General safety instructions"
Transport
To avoid harm or danger, always remove the blade before trans-
porting the machine. Using this machine without ear protectors
may jeopardize or harm your health. It may harm especially your
ears and increase the risk of an accident.
3.1 Introduction
This operating manual should be used to get the most benefit
from your ECO-STRIPPER. Following these instructions will
both extend the life of your machine and reduce repair costs.
Please ensure any user of the machine is fully familiar with the
instructions for use before allowing work to start.
3.2 Danger while working with the machine
The ECO-STRIPPER is designed to the highest technical stan-
dards. Incorrect use can be dangerous! Disturbances that could
impair safety, have to be eliminated at once.
2
10
Publicité
