Motorola ROKR 820 Guide De Démarrage Rapide page 3

5. BLUETOOTH CONNECTIO N
You can use your Speaker "ROKR 820" as an external speaker for your Bluetooth enabled smartphone or tablet.
1) Press Mode button to set to Bluetooth mode, or press
and hold the Play/Pause button to erase the previous connectings).
2) Choose "ROKR 820" on your mobile device to connect.
3) Once successfully connected, audio will stream from your Bluetooth device to this speaker.
NOTES:
• This speaker can memorize a maximum of 8 paired devices. The ninth paired device will replace the first one.
• The operational range between this speaker and a Bluetooth device is approximately 10 meters (30 feet).
• If a PIN code is requested while connecting a Bluetooth device, enter "0000".
• Bluetooth performance can be affected by the distance between this product and your Bluetooth device and the
environment of operation.
TO TERMINATE THE BLUETOOTH-ENABLED DEVICE:
• Turn off this speaker;
• Disable Bluetooth on your device;
• Move this speaker beyond the Bluetooth operational range.
TO RECONNECT THE BLUETOOTH-ENABLED DEVICE:
• When you turn on this speaker next time, it will reconnect to the last connected device automatically;
If not, manually select "ROKR 820" on your Bluetooth device to start a connection.
•
TWS MODE
Use two "ROKR 820" speakers can connect to each other in TWS mode.
1) Press and hold the TWS button of either speaker for 3 seconds, then release, TWS connection will be made with the
master speaker. By default, the speaker which connected to your smartphone is the master speaker (R channel), the
other one is the slave speaker (L channel).
2) In TWS mode, press and hold the TWS button for 3 seconds on either speaker or power off the speaker to exit the
TWS mode.
button to direct to Bluetooth pairing mode. (you can Press
3