ADEUNIS ARF8201CA Guide Utilisateur page 56

WMBUS ANALOG PWR - Guide utilisateur / User guide version V2.0.0
Explanation of thresholds and hysteresis:
FR
EN
The monitoring period by the sensors is fixed at 10 minutes (to change this value, contact the Technical Support Department).
The settings associated with this mode of operation are:
• The transmission periodicity (zero in this usage situation) (register 301).
• The presence and type of external sensor (registers 320 and 322).
• The configuration of the events (registers 321 and 323).
• The high alarm threshold channel A (register 324).
• The high alarm hysteresis channel A (register 325).
• The low alarm threshold channel A (register 326).
• The low alarm hysteresis channel A (register 327).
• The high alarm threshold channel B (register 328).
• The high alarm hysteresis channel B (register 329).
• The low alarm threshold channel B (register 330).
• The low alarm hysteresis channel B (register 331).
A complete list of the registers can be found in paragraph 3.4.
E.g.:
Register
S301
S320
S322
S321
S323
High alarm enabling
Value encoding Value
Decimal 0
Hexadecimal 0x02
Hexadecimal 0x01
Hexadecimal 0x03
Hexadecimal 0x02
Low alarm enabling
High alarm disabling
Result
Event mode
Channel A configured for a sensor 4-20mA
Channel B configured for a sensor 0-10V
On channel A:
Detection of high and low thresholds
Detection of event on disabled digital input
No waiting period
On channel B:
Detection of high thresholds
Detection of event on disabled digital input
No waiting period
high threshold
High threshold -
high threshold hysteresis
Sensor value
Low threshold +
low threshold hysteresis
Low threshold
Low alarm disabling
Page 56 of 83