Periodical Maintenance; In The Event Of Breakdown; Removal From Service, Disposal And Recycling - S&P EMIDRY-D Manuel D'installation

Masquer les pouces Voir aussi pour EMIDRY-D:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Overheating should be avoided as in addition to temporary disruption to settings
etc. repeated overheating may lead to malfunctions not covered by the guaran-
tee.

13. PERIODICAL MAINTENANCE

This appliance does not require any periodical maintenance. It need only be cle-
aned from time to time, using a vacuum cleaner fitted with a soft brush.
Alternatively, the appliance can be cleaned with a damp cloth. A pH-neutral soap
can be used for removing stains or blotches.

14. IN THE EVENT OF BREAKDOWN

1. Check that the ON/OFF switch is set to ON (with the red part showing)
2. Check that the appliance is receiving power (pilot or symbol)
3. Check that the temperature setting
is above the ambient temperature.
If none of these checks resolves the problem, contact a technical assistance
provider.
For any questions regarding S&P products, contact one of our After Sales offices
(Spain only) or your dealer (rest of world). To find your nearest S&P dealer, visit
our website at www.solerpalau.com

15. REMOVAL FROM SERVICE, DISPOSAL AND RECYCLING

- When not using the appliance for extended periods of time, it should be retur-
ned to its original packaging and stored in a dry, dust-free place.
- EU regulations and our commitment to future generations oblige us to recycle
used materials; please remember to dispose of all superfluous packaging mate-
rials at the appropriate recycling points, and to drop off obsolete equipment at the
nearest waste management point.
THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR DAMAGE TO
PERSONS AND/OR PROPERTY RESULTING FROM THE FAILURE TO COMPLY
WITH THESE INSTRUCTIONS.
S&P RESERVES THE RIGHT TO MODIFY THE PRODUCT WITHOUT PRIOR
NOTICE.
20

Publicité

Table des Matières
loading

Table des Matières