User manual
7.7.- Volume & Audio Control
1.- Volume Control
- To increase or decrease volume, use
Note: DTR 7122 has 18 volume levels and this can be controlled from the
volume level of your TV.
2.- Mute
- To mute the sound, press
normal sound, press this key once again.
3.- Audio Control
- Press the
key repeatedly to select one of three possible Audio
settings (Left, Right and Stereo)
- The current audio setting will be displayed in the channel information
4.- Language Selection
- Press the AUDIO key on the RCU repeatedly to select audio language.
This is dependent on the transmission of audio signal.
7.8.- Favourite List
To create a favorite group list press FAV key on the RCU.
You can access the next favorite group when you press FAV key again.
The method to group favorite channels is explained in the Favorite Channel
(See paragraph 8.2.- Favorite channel).
7.9.- UHF Tuning Mode
The RF button on the remote control allows you to see the selected RF
output channel.
If you wish to select a different channel, use the PR+, PR- buttons on your
remote control.
In this mode a standard signal is generated in the RF OUT connector and
the channel number flashes on the front display.
Key on the RCU.
button on the RCU. To bring back the
40
"DTR-7122"