General Viewing Function; Select Channel; Change From Input A And B In The Tv Scart Output; Previous Channel Recall - Televes Free To Air Manuel D'utilisation

User manual

7.- General Viewing Function

The following describes the basic functions of your DTR 7122 while watching terrestrial TV or listening to terrestrial radio.
While watching, the current channel information will be shown on the screen if you press the INFO button on the RCU.

7.1.- Select Channel

If you want to select channel, use
key on the RCU or numeric keys.
In addition to the above normal function, DTR 7122 provides more
convenient channel change function.
While watching, press OK key on the RCU. A channel list will be displayed
on the right side of the screen. If you press EXIT key, the channel list will
disappear.
To select a channel, go up or down this channel list and place the cursor on
a desired channel. The A/B button allows you to move forward in tens up
through the channel list.
Then, press OK key to watch the selected channel.

7.2.- Change from input A and B in the TV SCART output

This receiver allows you to view two programmes at the same time (one
through the TV SCART connector and the other through the VCR).
If you wish to view the available channel on the VCR SCART using the TV
SCART, press the A/B button on the remote control. A message "Input B"
will appear on the screen and the receiver's frontal display will indicate
"SLA".
When you select the output from the VCR SCART, it will not be possible to
execute the following functions:
- Access to the Main Menu
- Access to Teletext
- Access to the list of Favourites
- Access to the EPG information
- The following buttons (RF, VCR=TC, RCL and TV/AV) on the remote
control will not function.
Important: If the VCR=TV button is pressed, the receiver will show the
channel that is currently being shown on the TV output, on the
VCR output.

7.3.- Previous Channel Recall

Press RCL key on the RCU to move to the previous channel you watched.
key on the front panel or PR+, PR-
38
"DTR-7122"