User manual
2.- General Information
The DRT 7122 allows you to view a variety of terrestrial programs.
This user's guide covers the installation of the DTR 7122 and the necessary steps to operate various features.
It also explains special features available only in this DTR 7122 in detail, and will allow you to take full advantage of these
features
2.1.- Main Features
Fully MPEG2, DVB compliant
Digital Audio with AC-3 support by SPDIF
This allows the simultaneous viewing of two different
programmes through the output TV and VCR SCART
connectors.
256 color On-Screen-Display
User Friendly and easy-to-use Menú system
Various channel editing functions (favorite, moving,
locking, renaming, deleting and sorting)
It supports the automatic ordering of channels - LCN
(Logical Channel Number)
Stores up to 4000 programs
Easy and fast software upgrade through RS-232 port
Plug-and-play data transfer system (DSR to DSR)
2.2.- Unpacking
Unpack the DTR 7122 and check to make sure that all of the
following items are included in the packaging.
- 1 x Remote Control Unit (RCU)
- User's manual
- 2 x AAA batteries
- 1 x DTR 7122
- 1 x SCART cable
- 1 x Coaxial TV lead male/female (IEC)
2.3.- General Operation of the DTR 7122
Throughout this manual you will notice that the everyday operation of your DTR 7122 is based on a series of user friendly on
screen display and menus. These menus will help you get the most from your DTR 7122, guiding you through installation,
channel organizing, viewing and many other functions.
All functions can be carried out using the buttons on the RCU, and some of the functions can also be carried out using the
buttons on the front panel.
If at any time when using the menus you want to return to the normal TV mode, press the TV/AV button.
Please be aware that new software may change the functionality of the DTR 7122.
Should you experience any difficulties with the operation of your DTR 7122, please consult the relevant section of this
manual, or alternatively call your dealer or a customer service adviser.
Timer function, automatically turns On/Off by setting
function (daily, weekly, monthly, one time)
It lets the user select the VHF bandwidth (7 or 8 MHz)
Automatic reserved channel moving system
Electronic Program Guide (EPG)
OSD Teletext (DVB ETS 300 706) and Subtitle function
support
VBI Teletext support
Multi video output - CVBS, RGB
SCPC/MCPC receivable
Automatic PAL/NTSC conversion
Automatic last channel saving
7 different games are available
29
"DTR-7122"