Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
User manual
3.- Description of panels and controls
Front panel
Button
Switches between normal mode and standby.
CH
/ CH
To step up and down through the channels. To select the different elements in the menus.
VOL /VOL
It increases or decreases the volume. Select an element from within the menu
OK
Run the chosen option
MENU
This allows access to the main menu
In normal mode this displays the channel number
Display
In normal mode it shows receiver information (channel number, status,...)
LEDs
Red: powering; Green: available input signal; Yellow: standby mode
Rear panel
Name
ANT IN
The input of the terrestrial antenna's signal.
ANT OUT
Output of the RF signal to connect it to a TV or VCR.
VIDEO
Video signal output (RCA)
AUDIO R
Audio output (right channel).
AUDIO L
Audio output (left channel).
VCR
To connect a VCR via a SCART connector.
TV
To connect a TV via a SCART connector.
S/PDIF
Digital audio optic output.
RF IN
The input of the terrestrial antenna's signal or from the receiver itself (ANT OUT).
RF OUT
Output of the RF signal to connect it to a TV or VCR.
RS232
Serial port connection.
POWER
ON / OFF switch
Function
Function
30
"DTR-7122"
Publicité
Chapitres
Table des Matières
