User Installation; Channel Search - Televes Free To Air Manuel D'utilisation

User manual

6.- User Installation

This Menú consists of 4 sub-menus as shown below.

- Channel Search

- System Setting
- Parental Lock
- Factory Default
6.1.- Channel Search
1.- Channel:
- Select desired Channel using
display a Down List Box which also lets you select the desired channel.
2.- Frequency:
- Edit the desired frequency. To access this option, it is necessary to
press the red button on the remote control.
On the right-hand part of the screen, the information (Fft mode, guard,
constellation, hierarchy and code rate) of the selected channel will
appear once the signal has been received.
3.- Automatic Search:
- Carries out an automatic search, beginning with channel 2 and finishing
with channel 69.
- Network Search: Carries out a search of the channels of the
4.- Manual Search:
- Search a channel: Carries out a search of a specific channel, that
5.- Search all channels:
- Carries out a search of all the channels (scrambled and free).
- Search free channels: Carries out a search of the free channels.
DTR 7122 will automatically search channels for TV and Radio. During
this procedure you can see a list of the previously searched channels in
the Searched List Box on the screen.
On completion of searching channels, the cursor will be placed on
View automatically.
Now press OK button.
Note: The Radio and TV channels found are valid for Input "A" and
Input "B".
keys. Pressing the OK key will
/
selected channel operator.
has been previously selected in the channel
list.
34
"DTR-7122"