Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
English
(2) Raise the handle slowly and cut in with the saw blade little by little. (Fig. 24, Fig. 25)
(3) Hold the body firmly until the saw blade completely cuts into the material. (Fig. 26,
Fig. 27)
CAUTION:
Avoid plunge cutting for metallic materials. This can easily damage the blade.
Never pull the switch trigger while the tip of the saw blade tip is pressed against
the material. If you do so, the blade can easily be damaged when it collides with
the material.
Make absolutely sure that you cut slowly while holding the body firmly. If you
apply any unreasonable force to the saw blade during the cutting operation, the
blade can easily be damaged.
16
Fig. 24
Fig. 26
Fig. 25
Fig. 27
Publicité
Table des Matières
