Evolite AIR Série Mode D'emploi page 28

1."Spot" controls the RF receiving function of Spot series.
2. "Beam" controls the RF receiving function of Beam series.
3. "Wash" controls the RF receiving function of Wash series.
4. "Par" controls the RF receiving function of Par light series.
5. "Dimmer" brightness adjustment (press this button to adjust the
brightness by pressing the "+" and "-" buttons).
6. "Strobe"turn on the strobe (press this button to adjust the speed by pressing the "+" and ""-"buttons).
7. "< " (slow) Adjust the speed of the built-in program or adjust the
sensitivity of the sound control.
8. "> " (fast) Adjust the speed of the built-in program or adjust the
sensitivity of the sound control.
9. "1 - 9" is the program number key in the built-in program or voice
control state, press the corresponding button to enter the corresponding
program, press this button to select the color in the "Dimmer" or "Strobe"
state.
10. " REC" Clear all actions of the current fixtures.
11. "DMX" selects wired DMX signal as a signal source.
12. "WDMX" selects the wireless DMX signal as the signal source.
13. "Auto" running built-in program.
14. "Sound" running voice control program.
 Maintenance & service
28
Air Beam 60 User's Manual Ver. 1.00 Page