SEVERIN AT 2515 Mode D'emploi page 12

Adjusting the degree of browning
The desired degree of browning can be
varied by turning the adjustable browning
control knob.
Light: turn the control knob anti-clockwise.
Dark: turn the control knob clockwise.
In the case of sliced bread specifi cally
intended for toasting, we recommend a
browning control setting of 3 to 4.
Operation
∙ Insert the plug into the wall socket.
∙ After adjusting the browning control, insert
the bread into the toast slot and press the
operating lever down. The indicator lamp
will go on.
∙ Once the desired degree of browning
is reached, the toaster switches off
automatically; the slices are ejected, and
can be removed once the indicator lamp
goes off.
∙ To achieve regular browning when
toasting several slices in succession,
allow the toaster to cool down for 60 - 90
seconds after each cycle.
∙ Do not cover the toast slot during
operation.
Defrost function
The defrost function may be used in addition
to the normal action when toasting deep-
frozen bread. This will extend the toasting
process. This function is shown by the
indicator lamp.
12
Warm-up function
The warm-up function is suitable for
re-heating bread which has already been
toasted. Caution: Do not warm up buttered
bread.
After activating the toasting function, the
warm-up function can be used in addition.
This function is shown by the indicator lamp.
Interrupting the toasting cycle
If you want to interrupt the toasting cycle,
press the eject button. The toaster will switch
off and the slices are ejected.
Warming up rolls, buns etc
∙ To warm up buns, rolls or other bakery
items, push the slide control operating
lever for the warming top up to raise the
bread roll holder.
∙ Place the items to be warmed up on
the top, adjust the browning control to a
medium setting and then push down the
operating lever to switch on the toaster.
∙ Once the browning cycle is complete and
the appliance has automatically switched
off, turn the roll or bread over and repeat
the cycle.
∙ After use, return the bread roll holder
to its rest position by pushing the slide
control back down.
∙ Do not place the items directly on the
toast slot.