Specifications; Installation Instructions - Uberhaus 68125101 Guide De L'utilisateur

This convection heater is intended for permanent wall-mounting with the provided
brackets, and must be operated with a line voltage thermostat (sold separately).
The heater has a thermal cut-off protection. If the thermal cut-off protection trips, switch
off the power. The unit should reset automatically after 10 minutes. If the thermal cut-off
protection trips again, determine the reason for overheating.
68125101
Model
ECH104-750
Volts
240 V AC
Watts 750 W
Height 17.52" (44.5 cm) 17.52" (44.5 cm) 17.52" (44.5 cm) 17.52" (44.5 cm)
Width 18.7" (47.5 cm)
5.12" (13 cm)
Depth

INSTALLATION INSTRUCTIONS

• Installation must be performed in accordance with the requirements of CEC by
authorized personnel only.
Tools required (not included)
• Electric drill
• Phillips (cross-head) screwdriver
• Tape measure
Do not install heater closer than 6" (153 mm) to any
vertical or horizontal surface. This minimum distance
must be maintained. (Fig.1)

SPECIFICATIONS

68125102
ECH104-1000
240 V AC
1,000 W
22.64" (57.5 cm) 28.54" (72.5 cm) 34.84" (88.5 cm)
5.12" (13 cm)
3
68125110
ECH104-1500
240 V AC
1,500 W
5.12" (13 cm) 5.12" (13 cm)
68125103
ECH104-2000
240 V AC
2,000 W
Fig.1