Renkforce RUSD-1803BT Notice D'emploi page 45

Buttons (1) and
• With these buttons the receiving frequency can be changed to adjust stations in radio operation.
• Briefly pushing a button starts the automatic station search.
• The auto-scan only stops at the next station that can be received well.
• By pushing a button longer, you activate manual station scan.
• The display shows MANUAL.
• In this mode, the frequency is changed until you release the corresponding button again. Brief pushes of this button
changes the frequency step by step.
If buttons are not pressed for an extended period of time, the devices switches back to automatic station
search. The display shows AUTO.
Station buttons 1-6 (10-15)
• If you briefly push these buttons, you can select a station you have pre-set.
• If you want to store a station you are listening to, simply push the desired button for approx. three seconds.
Every one of the three FM ranges (FM1-3) has six radio station buttons. Therefore you can assign
18 station buttons.
F/PS button (16)
• Keep this button pushed to activate automatic station search. All stations that can be received well are automatically
stored for the station buttons 1-6 (10-15).
• After this procedure, the stored stations are played for a few seconds.
• Push this button only briefly to play every saved station for a few seconds (same function as after automatic station
storage).
• To permanently play back a station, push the button F/PS (16) again briefly.
AF button (4)
• Press this button briefly to switch the AF function on or off.
• The AF function activates automatic station tracking (see "RDS as reception concept").
• "AF" will be displayed. If the reception of an RDS transmitter station gets weaker or the radio does not receive and
RDS station at all, the display flashes. When a station can be received well, the symbol is displayed continuously.
• When you leave a transmission area, the radio can only switch to a better station when the AF function is activated.
This function can also be set in the menu item "AF ON/OFF" of the menu. For the description, see "Menu
Settings").
(19)
45