Renkforce RUCD-1804BT Notice D'emploi page 43

MOD / button (2)
• With this button the different audio sources are selected and the handsfree is operated (explained in more detail in
the chapter "Bluetooth
• Briefly push the button
RADIO > DISC > USB > SD > AUX > BT AUDIO
When one of the sources is not active, i.e. no medium inserted, this source will be skipped in the selection.
Setting the Time
• Keep the button PTY/CLK (11) pushed until the time is displayed and the hours flash.
• Set the hours by turning the rotary control (10).
• Push the rotary control (10) and adjust the minutes by turning the rotary control (10).
• Push the PTY/CLK button (11) to save the settings.
OPEN button (20)
• Press this button to unlatch the control panel.
RESET function
• This function resets all settings to factory settings.
• Push the button RESET (22) with a pointy object (e.g. a straightened paper clip) in the following cases:
- when you have completed the installation and connection
- when the device does not react to the operation of buttons any more
- when the display shows undefined characters
-Operation" later in these instructions) .
®
MOD /
(2) to switch to the next source:
43