Part 7. Technical Specifications - involight FOG400 Mode D'emploi

Method:
1. Disconnect the fogging machine from the mains and allow it to cool down sufficiently.
2. Fully drain the tank.
3. Place the unit in a well-ventilated place.
4. Fill the tank with the indicated cleaning fluid.
5. Connect the device to the power supply.
6. Wait until the required operating temperature is reached.
7. Operate the unit in a well-ventilated area with the cleaning liquid until the tank is empty.
8. Cleaning is complete. Turn the unit off and wait until it has cooled down completely before refilling the mist fluid.
Change of fuse.
IMPORTANT: Replace the fuse only with a fuse of the same type and with the same values (printed on the unit). If
the fuse is triggered repeatedly, please contact an authorized service center.
Method:
1: Unplug the power cord from the wall outlet.
2: Open the fuse holder on the back of the unit with a suitable screwdriver.
3: Remove the defective fuse from the fuse holder.
4: Insert the new fuse in the fuse holder.
5: Replace the fuse holder in the housing.
Maintenance and service are reserved for the authorized personnel only!

Part 7. Technical specifications:

MODELNAME:
Product Type:
Operating Voltage:
Power consumption:
Power supply:
Warm-up time:
Tank capacity:
Fluid consumption:
Output range:
Smoke output:
Remote control included:
Housing material:
Housing color:
Features:
Dimensions with bracket:
Weight:
FOG400
Fog machine
AC220-230V, 50Hz
400W
IEC power input socket with fuse holder
Approx. 3 minutes (depends on ambient temperature)
0.25 liters
11 ml / min
1.5 m
85 m3 / min.
Cable remote control "X-1" (fixed).
metal
black
215x115x148mm
215x115x161mm
1.8 kg
16