Part 4. Functions And Operation; Housing Back - involight FOG400 Mode D'emploi

Part 4. Functions and operation:

4.1 Housing Back:

1.
1.
POWER IN: IEC current input socket with fuse holder for F4AL250V fuse.
The assignment of the connection leads is as follows:
Line
Brown Outer conductor
Blue Neutral conductor
Yellow/Green
The protective conductor must be connected!
IMPORTANT: Replace the fuse only with a fuse of the same type and with the same values (printed on the unit). If
the fuse is triggered repeatedly, please contact an authorized service center.
2.
Cable for remote control (X-1).
3.
Tank level indicator:
Here you can see the filling status of the tank. Never let the machine run dry! This would destroy the pump.
Such a case is not covered by the warranty!
2. 3.
Pin International
Protection
L
N
14