Bosch GKS 18 V-LI Professional Notice Originale page 17

Use suitable detectors to determine if there are hid-
u
den supply lines or contact the local utility company
for assistance. Contact with electric cables can cause
fire and electric shock. Damaging gas lines can lead to ex-
plosion. Breaking water pipes causes property damage.
Do not operate the power tool when stationary . It is
u
not suitable for operation with a saw table.
When performing plunge cuts which are not right-
u
angled, secure the guide plate of the saw so that it will
not shift sideways.In the event of a sideways shift, the
saw blade may become jammed, which could lead to kick-
back.
Secure the workpiece. A workpiece clamped with
u
clamping devices or in a vice is held more secure than by
hand.
Do not use HSS saw blades. Such saw blades can easily
u
break.
Do not saw any ferrous metals. Hot chips may ignite the
u
dust extractor.
Wear a dust mask.
u
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g.
against continuous intense sunlight, fire,
water and moisture. There is a risk of explo-
sion.
Always wait until the power tool has come to a com-
u
plete stop before placing it down. The application tool
can jam and cause you to lose control of the power tool.
Hold the power tool firmly with both hands and make
u
sure you have a stable footing. The power tool can be
more securely guided with both hands.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Bosch Power Tools
Intended use
The power tool is intended for making straight cuts in wood
with and against the grain and mitre cuts in wood while rest-
ing firmly against the workpiece.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Lock-off button for on/off switch
(2) On/off switch
A)
(3) Battery
(4) Protective guard
(5) Adjusting lever for retracting blade guard
(6) Base plate
(7) Retracting blade guard
(8) Parallel guide
(9) Cut mark 0°
(10) Cut mark 45°
(11) Wing bolt for mitre/bevel angle preselection
(12) Wing bolt for parallel guide
(13) Scale for mitre/bevel angles
(14) Spindle lock button
(15) Auxiliary handle (insulated gripping surface)
(16) Hex key
(17) Handle (insulated gripping surface)
(18) Saw spindle
(19) Mounting flange
A)
(20) Circular saw blade
(21) Clamping flange
(22) Clamping bolt with washer
(23) Markings on protective guard
(24) Battery release button
(25) Fastening screw for dust extraction adapter
(26) Dust extraction adapter
A)
(27) Extraction hose
(28) Cutting depth scale
(29) Clamping lever for cutting depth preselection
A)
(30) Pair of screw clamps
(31) Button for battery charge indicator
A)
(32) Battery charge indicator
A)
(33) Guide rail
A)
(34) Connector
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
English | 17
A)
1 609 92A 4LJ | (20.12.2018)