Ethernet/Ip - schmersal SD-I-U Série Mode D'emploi

Masquer les pouces Voir aussi pour SD-I-U Série:
Table des Matières

Publicité

Mode d'emploi
Passerelle Universelle pour diagnostic sériell
Description du bus de terrain
Front View
10.3

Ethernet/IP

#
Item
1
Network Status LED
2
Module Status LED
3
Link/Activity
4
Ethernet Interface
Network Status LED
Note: A test sequence is performed on this LED during startup.
LED State
Off
Green
Green, flashing
Red
Red, flashing
Module Status LED
Note: A test sequence is performed on this LED during startup.
LED State
Off
Green
Green, flashing
Red
Red, flashing
LINK/Activity LED
LED State
Off
Green
Green, flickering
Ethernet Interface
The ethernet interface supports 10/100Mbit, full or half duplex operation.
1
Description
No power or no IP address
On-line, one or more connections established (CIP Class 1 or 3)
On-line, no connections established
Duplicate IP address, FATAL error
One or more connections timed out (CIP Class 1 or 3)
Description
No power
Controlled by a Scanner in Run state
Not configured, or Scanner in Idle state
Major fault (EXCEPTION-state, FATAL error etc.)
Recoverable fault(s)
Description
No link, no activity
Link established
Activity
FR
About the Anybus-CompactCom EtherNet/IP 1-2
1
8
2
4
3
SD-I-U-...
11

Publicité

Table des Matières
loading

Table des Matières