Rc Functions - XciteRC Rocket 125 Mode D'emploi

EN
• MODE SELECTION: to select the control mode 1 or 2 (see chart RC functions), switch the trans-
mitter off and press the right trim lever. Now switch on the transmitter again (5).
• If the flight battery runs low, the LEDs on the motor mounts starts flashing. From now on the model is con-
trollable for one more minute only. Find a suitable landing spot and land. Charge the flight battery again.

RC functions

Mode 1 (factory setting)
20
Mode 2
RC functions
XciteRC Rocket 125 3D