Sony SHAKE-X30 Mode D'emploi page 42

The remote control does not
function.
Remove the obstacles between
• •
the remote control and the unit.
Move the remote control closer to
• •
the unit.
Point the remote control at the
• •
unit's sensor (page 17).
Replace the batteries (R03/size
• •
AAA).
Move the unit away from the
• •
fluorescent light.
There is acoustic feedback.
Reduce the volume.
• •
Move the microphone and guitar
• •
away from the system or change
the direction of the microphone.
"PLEASE CONNECT ALL SPK"
appears.
Check that all speakers are
• •
connected.
"CHILD LOCK" appears when you
press any button on the unit.
Set the Child Lock function to off
• •
(page 39).
A clicking sound is heard when
turning the power on.
This is the operating sound and it
• •
occurs when the power is turned
on or off, for example. This is not a
malfunction.
Speakers
Sound comes from only one
channel or the left and right
volume is unbalanced.
Place the speakers as
• •
symmetrically as possible.
Check that the speakers are
• •
connected securely and correctly.
The source being played back is
• •
monaural.
42
US
There is no sound from a specific
speaker.
Check that the speaker is
• •
connected securely and correctly.
Disc player
The disc tray does not open and
"LOCKED" appears on the display.
Consult your nearest Sony dealer
• •
or local authorized Sony service
facility.
The disc tray does not close.
Load the disc correctly.
• •
The disc does not eject.
You cannot eject the disc during
• •
Synchronized Transfer or REC1
Transfer. Press  to cancel the
transfer, then press  on the unit
to eject the disc.
Consult your nearest Sony dealer.
• •
Playback does not start.
Wipe the disc clean (page 47).
• •
Reload the disc.
• •
Load the disc that this system can
• •
play back (page 8).
Remove the disc and wipe away
• •
the moisture on the disc, then
leave the system turned on for
a few hours until the moisture
evaporates.
The sound skips.
Wipe the disc clean (page 47).
• •
Reload the disc.
• •
Move the unit to a place with no
• •
vibration.
Move the speakers away from the
• •
unit. When you listen to a track
with bass sounds at high volume,
the speaker vibration may cause
the sound to skip.