Cleaning
NOTE on material damage
− Do not immerse the scales in water or other liquids.
− Do not under any circumstances use harsh, scraping, or abrasive clean-
ing agents or the like to clean the scales. If you do, the surface could
be scratched.
− Wipe down the scales as needed using a lightly dampened, soft cloth.
− Disinfect the weighing surface from time to time using a suitable disinfecting
agent (available at specialist retailers and pharmacies).
Fault/Remedy
Fault
No function
The scales appear to be displaying
false weighing results
"Err" is shown on the display
"LO" is shown on the display.
Bathroom Scales BE 1709 | BE 1710
Possible Cause
Is the battery empty or has it been inserted
incorrectly?
Are the scales standing on a firm, even
surface?
Is a device that can cause electromagnetic
disturbances located in the vicinity of the
scales?
Remove the batteries from the battery
compartment and wait a moment. Re-insert
the batteries.
The maximum capacity of the scales (150 kg)
has been exceeded.
The batteries are empty (see "Inserting/
changing batteries").
Cleaning
19