Mounting And Operating - CasaFan WM3 Stand Eco IP44 Instructions De Montage Et De Service


About this operating instructions
Before using the CasaFan fan, read the operating instructions carefully. Keep the operating
instructions within reach. Never pass the fan onto another person without the operating
instructions.
Explanation of symbols:
Dangerous electric voltage
Warn the user of the dangers caused by
electricity
Describing the CasaFan-Ventilator
The fan is used to circulate the room air. Use in machines, unprotected outdoors, in garages or
in rooms subject to fire and explosion hazards is not permitted. According to the Machinery Di-
rective 2006/42/EC Part 1, it is also suitable for commercial use. It has a cable H05RN-F 3 G 1.0
mm² (oil-resistant) with a length of 2.5 m.
Technical data:
Mains voltage:
Power:
Protection clas:
No of speeds:
Dimensions Ø x H (mm)
Weight (kg):
Caution! Only operate the unit when completely assembled!
- Unpack the CasaFan fan, check if everything is present (see Figure) and for visible signs
of damage.
1. Front guard
2. Blade
3. Adjustment screw (1x)
4. Screw (4x)
5. Rear guard
6. Axle (gearing)
- Dispose of packaging taking the environment into account and keep out of the reach of
children.
Assembly
Please proceed as per figure
- Tighten all screws. When screwing in the blade screw (3.), make sure that the look is seated
in the groove on the axle.
- Lock the 7 clamps (A) to connect the front and rear grille.
- Tighten the grille safety screw (9.) to secure the grille against opening!
Particular note for the user.
Wind machine WM3 Stand Eco IP44 / WM3 Wall Eco IP44
7. Motorunit
8. Mounting plate
9. Safety screw grille (1x)
10. Adjustment screw
11. Screw (4x)
12. Adjustment screw
Œ-’
on Page 3 - 4 of these operating instructions.
Translation of original instructions
Careful
220 - 240 V, 50 Hz
123 Watt
I / IP 44
3
1700/700 x 700 x 600/405
18,0 / 12,5 kg
13. Base
14. Switch
15. Rod
16. Nut (5 x)
17. Screw with sleeve
18. Wall bracket
GB
9