Marvel ML24BC Instructions D'installation, D'utilisation Et D'entretien page 21

Installed shelf
tang
Rear tang
(hook) on
shelf
Figure 39a
Tall bottle
storage
area
Figure 39
SHELVING CONFIGURATIONS
To Add or Remove a Shelf
Remove stored product from the shelf. Do not try to remove
a loaded shelf from the appliance. Grasp the shelf front with
both hands, rotate the front upward and lift out. (See Figure
39b). To install a shelf insert the shelf in the appliance and
insert the top hooks into the shelf support slots and drop
the shelf down so the hooks drop over the bottom of the
Shelf support
slots.
slot
Make sure your cantilever shelf is secure on the shelf sup-
ports by pressing down on the shelf before loading.
Grasp the shelf by the front with
both hands and rotate the front
of the shelf up, then lift the shelf
up and remove the shelf from the
shelf ladders.
Never try to move a loaded shelf, remove everything from
the shelf before moving. Use both hands when moving the
shelf.
21
CAUTION
!
CAUTION
!
Figure 39b