Bosch UniversalLevel 3 Notice Originale page 16

16 | English
Cross line laser
Working range up to approx.
Laser line aperture angle
Levelling accuracy
– Laser lines
– Laser point
Typical self-levelling range
Typical levelling time
Operating temperature
Storage temperature
Max. altitude
Max. relative air humidity
Pollution degree according to IEC 61010-1
Laser class
Laser lines
– Laser type
– C
6
– Divergence
Laser point
– Laser type
– C
6
– Divergence
Tripod mount
Batteries
Approx. operating time
Weight according to EPTA-Procedure 01:2014
Dimensions (length × width × height)
A) The working range may be reduced by unfavourable environmental conditions (e.g. direct sun-
light).
B) Only non-conductive deposits occur, whereby occasional temporary conductivity caused by
condensation is expected.
The serial number (6) on the type plate is used to clearly identify your measuring tool.
1 609 92A 5DW | (05.12.2019)
A)
UniversalLevel 3
10 m
120°
±0.5 mm/m
±1.0 mm/m
±4°
< 4 s
+5 °C to +40 °C
–20 °C to +70 °C
2000 m
90%
B)
2
2
630–650 nm, < 10 mW
10
50 × 10 mrad (full angle)
630–650 nm, < 1 mW
1
0.8 mrad (full angle)
1/4"
3 × 1.5 V LR6 (AA)
5 h
0.54 kg
131 × 75 × 126 mm
Bosch Power Tools