Marvel ML15BCG2 Série Instructions D'installation page 17

Installed shelf
tang
Rear tang
(hook) on
shelf
Figure 22a
Figure 22
SHELVING CONFIGURATIONS
To Add or Remove a Shelf
Remove stored product from the shelf. Do not try to remove
a loaded shelf from the appliance. Grasp the shelf front with
both hands, rotate the front upward and lift out. (See Figure
22b). To install a shelf insert the shelf in the appliance and
insert the top hooks into the shelf support slots and drop
the shelf down so the hooks drop over the bottom of the
Shelf support
slots.
slot
Make sure your cantilever shelf is secure on the shelf sup-
ports by pressing down on the shelf before loading.
Never try to move a loaded shelf, remove everything from
the shelf before moving. Use both hands when moving the
shelf.
17
CAUTION
!
Grasp the shelf by the front with both hands
and rotate the front of the shelf up, then lift
the shelf up and remove the shelf from the
shelf ladders.
CAUTION
!
Figure 22b