Panasonic ER‑GN30 Manuel D'utilisation page 9

Beforerequestingrepair
Please check the following:
Problem
The cutting
performance has
been diminished.
There is an odd
odor.
Blade does not
move/rotate
smoothly.
Replacementblade
To maintain a sharp cutting performance, it is recommended to
replace the blade approximately every 3 years.
When replacing the blade, replace both the outer blade and the
inner blade at the same time.
SPECIFICATIONS
Model No.
Power source
This product is intended for household use only.
Possiblecause
Deformation of the
blade
Wear in the blade
(Guideline for blade
replacement:
approx. 3 years)
Battery has run out.
Inner blade has not
been cleaned.
ER‑GN30
AA LR6 alkaline dry‑cell battery
(Sold separately)
Action
Replace the
blade.
Replace the
battery.
Clean the inner
blade.
9