TECHNICAL DATA
Definition in according to:
Constructive system
Nominal thermal power in kW
Efficiency in %
smoke outlet diameter in mm
Chimney height ≥ (m) - dimension (mm)
Depression by rating calorific value in Pa - wood
Hourly wood consumption in Kg / h (wood with 20% humidity)
CO measured at 13% oxygen in %
Exhaust gas emission in g/s - wood
Exhaust gas temperature in °C - wood
Hearth opening size in mm (W x H)
Hearth size in mm (W x H x D)
Oven size in mm (W x H x D)
Type of grill
Height in mm
Width in mm
Depth in mm
Weight in kg
Fire prevention safety distances
m
riscaldabili (30 kcal/h x m
3
(*) The proposed value are indicative. The installation must, in any case, be sized and verified according to the general calculation method in UNI
EN13384-1 or by another method of proven efficiency.
(**) For those buildings in which the thermal insulation does not correspond to the instructions on heat protection, the heating volume of the product
is: favourable type of building (30 kcal/h x m
With thermal insulation in accordance with the regulations regarding energy saving, the heated volume is greater. With temporary heating, in
the event of interruptions which last more than 8 hours, the heating capacity is reduced by about 25%.
The declared technical data have been achieved by burning beech wood class "A1" according to the requirement UNI EN ISO 17225-5 and wood
moisture content less than 20%. By burning a different kind of wood the efficiency of the product itself could change and some specific adjustments
on the appliance could be needed.
TECHNICAL DEsCRIPTION
The chimney stoves of La Nordica are suitable to heat living spaces for some periods.
As fuel, wood logs are used. The appliance works as an intermittent operating appliance.
The stove is made of sheets in galvanized and painted steel, of cast iron (grate and grate holder of the hearth, exhaust pipe) of majolica tiles
and of glass panels. The hearth is totally sheathed with cast-iron single sheets and refractory material (NORDIKER). Inside there are a easy
extractable thick flat grate and its holder. The combustion chamber is hermetic welded and is sheathed with a painted steel carter.
The inside smoke plate made of vermiculite, reflects the fire radiation and increases the internal temperature of the combustion chamber. This
process together with the exhaust gases flows, makes optimal the combustion and improves the efficiency.
singular feature of the model FORTUNA and Fortuna PANORAMA is the pivoting body, i.e. the possibility of rotating the stove of +-
45° (with regard to its base axis) also when is lighted. It is also possible to block the appliance at the wished position by a knob.
The one-piece ceramic glass of the door (resistant up to 700°C) allows a wonderful view on the burning flames. Furthermore, it is thus avoided
the output of sparks and smoke.
Below the hearth grate there is an extractable ash drawer,
ACCEssORIEs
The heating of the environment is made by irradiation: through the panoramic glass and the external hot surfaces of the stove, the heat is
radiated into the environment (See chapter CALCULATION OF THE THERMAL POWER).
)
3
); less favourable type of building (40 kcal/h x m
3
(Picture
POKER
SERIES
FORTUNA
FORTUNA
PANORAMA
EN 13240
EN 13240
1
1
7
7
80,4
80,4
150
150
(*) 4 - 200x200 Ø200
2
2
0,06 - 750 mg/m
0,06 - 750 mg/m
3
5,4
5,4
292
292
327x404
327x404
318x470x370
368x470x400
/
/
1267
1267
526
526
505
505
Chapter TECHNICAL DATA SHEETS
200 (**)
200 (**)
); unfavourable type of building (50 kcal/h x m
3
8).
GLOVE
SERIES
ENgLIsH
FORTUNA
BIFACCIALE
EN 13240
1
8
80,4
150
12 ( 1,2 mm H
O)
2
2
0,10 - 987 mg/m
3
3
7,4
260
315x285
319x460x340
/
Movable - flat
1267
526
505
Chapter FIRE SAFETY
229 (**)
RING Ø 100mm air fitting
SERIES
FORTUNA
sTEEL
EN 13240
1
7
80,4
150
2
0,06 - 750 mg/m
3
5,4
292
327x404
318x470x370
/
1169
524
505
200 (**)
).
3
6)
(Picture
25