TECHNICaL DaTa
Definition in according to:
Constructive system
Nominal thermal power in kW
Efficiency in %
Smoke outlet diameter in mm
Chimney height ≥ (m) - dimension (mm)
Depression by rating calorific value in Pa (mm H
- wood
Hourly wood consumption in kg/h (wood with 20%
humidity)
CO measured at 13% oxygen in %
Exhaust gas emission in g/s - wood
Exhaust gas temperature in °C - wood
Hearth opening size in mm (W x H)
Hearth size in mm (W x H x D)
Oven size in mm (W x H x D)
Type of grill
Height in mm
Width in mm
Depth (with handles) in mm
Weight in kg
fire prevention safety distances
m
riscaldabili (30 kcal/h x m
3
(*) The proposed value are indicative. The installation must, in any case, be sized and verified according to the general calculation method in UNI
EN13384-1 or by another method of proven efficiency.
(**) For those buildings in which the thermal insulation does not correspond to the instructions on heat protection, the heating volume of the product
is: favourable type of building (30 kcal/h x m
With thermal insulation in accordance with the regulations regarding energy saving, the heated volume is greater. With temporary heating, in
the event of interruptions which last more than 8 hours, the heating capacity is reduced by about 25%.
The declared technical data have been achieved by burning beech wood class "A1" according to the requirement UNI EN ISO 17225-5 and wood
moisture content less than 20%. By burning a different kind of wood the efficiency of the product itself could change and some specific adjustments
on the appliance could be needed.
TECHNICaL DESCrIPTION
Definition: product according to EN 13240. The appliance works as an intermittent operating appliance.
The chimney stoves of La Nordica are suitable to heat living spaces for some periods or to support an insufficient centralized heating system.
They are ideal for holiday apartments and weekend houses or as an auxiliary heating system during the whole year. As fuel, it is possible to use
wood logs. The chimney stove is made of raw and enamelled meltings of cast iron.
The hearth is internally sheathed with single sheets in cast iron and inside it there is a turning and extractable grate. Thanks to the calibrated
holes of that side, a contribution of pre-heated air inside the hearth is guaranteed, obtaining a post-combustion, which increases the yield
and reduces the exhaust gases emissions.
The hearth is equipped with a panoramic door with ceramic glass (resistant up to 700 °C). This allows a wonderful view on the burning flames
and avoids any possible output of sparks and smoke.
24
ISETTa EVO 4.0
ISETTA CERCHI EVO 4.0
O)
2
)
3
); less favourable type of building (40 kcal/h x m
3
ISOTTa EVO
ISOTTA CERCHI EVO
EN 13240
EN 13240
1
7,3
11,9
83,6
150
150
(*) 4
(*) 4
200X200 Ø200
200X200 Ø200
12 (1,2)
11 (1,1)
2,0
0,091
6,2
223
272
380 x 225
519 x 305
439x280x200
597x360x290
/
706
775
760
660
790
590
660
160
205
167
209 (**)
338 (**)
ENGLISH
ISOTTa
fOrNO EVO
EN 13240
1
1
9,7
82
87,7
150
(*) 4
200X200 Ø200
10 (1,0)
3,2
2,6
0,1
0,07
9,3
8,2
162
519 x 305
546x360x290
/
443x290x305
Movable - flat
1244
830
795
530
296
216
4
Chapter
278 (**)
); unfavourable type of building (50 kcal/h x m
3
GIULIETTa x
4.0
EN 13240
1
6,5
81,7
120
(*) 4
200X200 Ø200
12 (1,2)
1,85
0,088
5,3
264
235 x 260
350x290x225
/
706
487
430
115
186 (**)
).
3