General Precautions; Declaration Of Conformity Of The Manufacturer; Installation Regulations - Nordica TermoROSSELLA Plus - DSA Manuel Utilisateur

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Š CHECK FOR THE PRESENCE OF ANy OBSTRUCTIONS BEFORE SWITCHING THE APPLIANCE ON FOLLOWING
A PROLONGED PERIOD OF INACTIVITy.
Š THE GENERATOR HAS BEEN DESIGNED TO FUNCTION IN ANy CLIMATIC CONDITION. IN PARTICULARLy
ADVERSE CONDITIONS (STRONG WIND, FREEzING) SAFETy SySTEMS MAy INTERVENE THAT SWITCH THE
GENERATOR OFF. IF THIS OCCURS, CONTACT THE TECHNICAL AFTER-SALES SERVICE AND ALWAyS DISABLE
THE SAFETy SySTEMS.
Š IN THE EVENT THE FLUE CATCHES FIRE, USE SUITABLE SySTEMS FOR SUFFOCATING THE FLAMES OR
REQUEST HELP FROM THE FIRE BRIGADE.
Š THIS APPLIANCE MUST NOT BE USED TO BURN WASTE
Š DO NOT USE ANy FLAMMABLE LIQUIDS FOR IGNITION
Š THE MAJOLICAS ARE TOP QUALITy ARTISAN PRODUCTS AND AS SUCH CAN HAVE MICRO-DOTS, CRACKLES
AND CHROMATIC IMPERFECTIONS. THESE FEATURES HIGHLIGHT THEIR VALUABLE NATURE. DUE TO THEIR
DIFFERENT DILATION COEFFICIENT, THEy PRODUCE CRACKLING, WHICH DEMONSTRATE THEIR EFFECTIVE
AUTHENTICITy. TO CLEAN THE MAJOLICAS, IT IS RECOMMENDED TO USE A SOFT, DRy CLOTH. IF A DETERGENT
OR LIQUID IS USED, THE LATTER COULD PENETRATE INSIDE THE CRACKLES, HIGHLIGHTING THEM.

gENERAL PRECAUTIONs

La NORDICA s.p.A. responsibility is limited to the supply of the appliance.
The installation must be carried out scrupulously according to the instructions provided in this manual and the rules of the profession.
Installation must only be carried out by a qualified technician who works on behalf of companies suitable to assume the entire responsibility
of the system as a whole.
La NORDICA s.p.A. declines any responsibility for the product that has been modified without written authorisation as
well as for the use of non-original spare parts. NO MODIFICATIONs CAN BE CARRIED OUT TO THE APPLIANCE. La NORDICA
s.p.A. cannot be held responsible for lack of respect for such precautions.
It is OBLIgATORY to respect the National and European rules, local regulations concerning building matter and also fireproof rules.

DECLARATION OF CONFORMITY OF THE MANUFACTURER

Object: Absence of asbestos and cadmium
We declare that the materials used for the assembly of all our appliances are without asbestos parts or asbestos derivates and that in the
material used for welding, cadmium is not present, as prescribed in relevant norm.
Object: CE n. 1935/2004 regulation.
We declare that in all products we produce, the materials which will get in touch with food are suitable for alimentary use, according to the
a.m. CE regulation.

INsTALLATION REgULATIONs

Installation of the product and auxiliary equipment in relation to the heating system must comply with all current Standards and Regulations
and to those envisioned by the law.
The installation and the relating to the connections of the system, the commissioning and the check of the correct functioning must be carried
out in compliance with the regulations in force by authorised professional personnel with the requisites required by the law, being national,
regional, provincial or town council present in the country within which the appliance is installed, besides these present instructions.
Installation must be carried out by authorised personnel who must provide the buyer with a system declaration of conformity and will assume
full responsibility for final installation and as a consequence the correct functioning of the installed product.
Before installing the appliance, carry out the following checks:
• Verify if your structure can support the weight of the appliance. In case of insufficient carrying capacity it is necessary to
adopt appropriate measures, La NORDICA responsibility is limited to the supply of the appliance (See chapter TECHNICAL
DESCRIPTION).
• Make sure that the floor can support the weight of the appliance, and if it is made of flammable material, provide suitable
insulation (DIMENSIONS ACCORDING TO REGIONAL REGULATIONS).
• Make sure that there is adequate ventilation in the room where the appliance is to be installed, with particular attention to windows and
doors with tight closing (seal ropes).
• Do not install the appliance in rooms containing collective ventilation ducts, hoods with or without extractor, type B gas appliances, heat
pumps, or other appliances that, operating at the same time, can put the room in depression (ref. UNI 10683 standard)
ENgLIsH
23

Publicité

Table des Matières
loading

Table des Matières