Publicité
Les langues disponibles
Les langues disponibles
INNER CLEANING
Unplug from the mains before cleaning.
By tank cleaning, proceed as follows:
1) Place the goods in special refrigerated containers, kept at the same temperature and remove the shelves
2) Unplug the unit
3) Leave the doors open and begin the operation of tank washing when the tank temperature is the
same as the ambient temperature.
4) Clean and dry the interior of the tank with a soft cloth, using neutral soap.
Then plug the unit and wait till the appliance reaches the right temperature before filling it again.
Do not use any aggressive or abrasive cleaning agents.
Never use a water hose or a high-pressure jet to clean the cabinet.
Warning! Do not use water jets for cleaning: this can damage the electrical
parts.
Warning! Do not use mechanical appliances or other means to speed up the
defrosting process, other than those recommended by the manufacturer.
SEASONAL USE
When the unit is not used for a long time, please take note of the following procedures:
•
unplug the unit.
•
clean and dry the tank well.
•
leave the glass door open to avoid possible formation of bad odours.
•
cover the unit with a curtain, place it in a dry room and sheltered from the atmospheric agents.
Each refrigerating appliance is provided with a thermostat for automatic maintenance of the appropriate
pre-established temperature inside the tank.
This temperature adjuster is gauged by the factory and should not be touched by the user.
Only if the average internal temperature is too cold or not cold enough should the knob (2) turned.
The numbers on the regulation plate are not related to temperature values but only to knob reference
position: a higher number corresponds to a lower temperature.
Defrosting is executed automatically.
1
3
TEMPERATURE SETTING
2
-17-
CONTROLS
1.
Thermometer
2.
Thermostat
3.
Light switch
Publicité
