Setting The Telephone - switel DF 1851 Mode D'emploi

9 Setting the telephone

Menu HANDSET
Menu . . .
☞
If you set a handset PIN (any four digit number) you'll always need to
key it in before you can use the handset menu.
Sound
Auto Answer
Registration
Select Base
Name Handset
Language
PIN Handset
Set Default
Press Menu, select HANDSET and press OK.
Volume - Press OK and set the volume for internal
and external calls.
Melody - Press OK and set the melody for internal and
external calls.
Key Beep - Set the key beep on or off.
If this function is on an incoming call will immediately
be taken when the handset is taken from the base.
For registering a handset on a base. Select the base,
the handset should be registered on and enter the rele-
vant PIN. For further information please refer to the
documentation of the relevant base.
If your handset is already regsitered to several base
stations you can select the "active" base..
To better distinguish between handsets, you can give
each handset a name.
Set the desired display language.
If you want to protect the menu from unauthorized
access, you can program a 4-digit handset PIN. As
delivered, the handset PIN is set to "0 0 0 0". In this
case the menu access without the PIN-entry is possi-
ble. To deactivate a PIN code request for the menu
again, simply enter "0 0 0 0".
After a confirmation query the handset will be reset to
delivery state.
☞
The phonebook entries will not be deleted.
Setting the telephone
GB
19