Setting The Thermocouple Type; Setting The Thermocouple Offset - VOLTCRAFT DL-240K Notice D'emploi

e) Setting the thermocouple type
A short press on the DOWN (5) indicates the thermocouple type setting.
long press
ENTER to the
type setting
mode
To change the sensor type, press the ENTER (7) until MODE appears on the display and then press the DOWN (5)
repeatedly until the desired sensor type is selected. Press ENTER (7) to confirm until MODE is no longer displayed.
f) Setting the thermocouple offset
A short press on the DOWN (5) indicates the offset setting.
long press
ENTER to the
type setting
mode
To change the offset in probe type setting mode, press and hold the ENTER (7) until MODE appears on the display.
Now the value can be changed by -0.1 by briefly pressing the DOWN (5) and by -1.0 by pressing and holding it down.
The value is reduced to 5.0 and then jumps to 5.0 and can be reduced to 0.0. To confirm, press the ENTER (7) until
MODE is no longer displayed.
short press
DOWN change
type
short press
DOWN change
type
long press
ENTER to save
offset.
long press
ENTER to save
offset.
51