Before You Start; Assembly - Echo ES-255ES Manuel D'utilisation

Before you start

Assembly

Read the operator's manual carefully to ensure that you assemble the product correctly.
Never perform maintenance or assembly procedures with engine running.
Using a product that has been incorrectly assembled could lead to an accident or serious injury.
Install vacuum tube
1. Knob
1. Vacuum tube
Install debris bag
1. Locking ring
WARNING
2. Housing cover
Before you start
1. Turn knob counter clockwise until hinged housing cover is
free to open for vacuum tube installation.
2. Opening housing cover, slide recess (G) on vacuum tube
into locking rib (H) , and turn the vacuum tube clockwise so
that it would be locked.
NOTE
Engine will not start/operate unless safety interlock switch (I) is
activated by the vacuum tube.
1. Stand unit upright on blower base.
2. Release locking ring with a coin or screwdriver, and rotate so
that lock symbol (A) is at top of ring.
14