Publicité
Les langues disponibles
Les langues disponibles
Attaching catch bag
Disconnect the power plug before
adjustments or maintenance.
Lift protective flap (P). Hang catch bag (1)
with the hooks on both bolts of the side
elements.
Switching ON / OFF
Disconnect the power plug before
adjustments or maintenance.
Motor on (fig. B2)
Press button (1) and hold.
Lift lever (2) and release button (1).
Motor off (fig. B2)
Release lever (2).
ATTENTION !
carrying out any
ATTENTION !
carrying out any
WORKING ADVICE
Place the SCEE12002B on the edge of the lawn, as
close to the power point as possible. Work away
from the power point.
Position the cable to opposite side (already
raked/verticut lawn) at the end of each turn.
When raking/verticutting do not allow the mo-
tor to labour.
When the motor labours the speed of the motor
drops and you will hear a change in the motor
sound. When this occurs, stop raking, release
switch lever 2 and raise the height of cut. Failure to
do so could damage the machine.
_
Always wear gardening gloves when han-
dling or working near the sharp tines/blade.
Optimum conditions for raking/verticutting are
when the grass is short and slightly damp. Rak-
ing/Verticutting when the ground is very soft or
hard it will may damage the lawn and will result
in poor collection.
– Kill moss with a proprietary moss killer be-
fore raking/verticutting.
– Start the SCEE12002B at the highest
raking/verticutting position and lower as necessary.
– Rake/Verticut the lawn in the one direction,
then proceed at right angles a week later until the
whole lawn has been completed.
– The action of removing moss and debris during
raking/verticutting may reveal ragged and bare
patches depending on lawn conditions.
Ideal times for raking/verticutting are spring and
late autumn.
25
Publicité
