Publicité
Les langues disponibles
Les langues disponibles
Assemble the right handle element in the same
order.
Assembling top of handle
First slide cable restraint over upper handle bar.
Attach the two parts to each other by using
the bolts with special shaped head (C) and fix
the bolts in place with the wing nuts (H).
Fasten switch cable with the clips (L) on the handle
rod.
OPERATION
_ The tines/blades continue to rotate for a
few seconds after the machine is switched
off. Allow the motor and tines/blades to
stop rotating before switching "on" again.
_ Do not rapidly switch off and on.
Note: To aid starting push handle down to lift
front wheels.
The lawn should be scarified several times each
year.
Before using the machine, the lawn must be cut to a
height of 2.5 to 3.5 cm.
Setting the working depth
Disconnect the power plug before
carrying out any adjustments or
The working depth is adjustable to 3 heights. Pull
adjustment arm (1) away from side cover and allow
catch in desired position (2). Adjust the height
alternately left and right by only 1 position. The
adjustment arms must always be in the same height
position.
Lower and middle position of scarifier cylinder:
Removes moss and weeds from the lawn.
Top position of scarifier cylinder:
Remove grass remnants from the lawn.
ATTENTION !
maintenance.
24
Publicité
