hergom ECK Instructions D'installation, De Service Et D'entretien page 38

SAFETY DISTANCES
Compact device approved in accordance with Standard:
UNE-EN 13229:2001 "Inset appliances including open fires fired by solid fuels. Requirements and test methods",
modified by UNE-EN 13229/AC, UNE-EN 13229/A1:2003 and UNE-EN 13229:2002/A2:2005.
900 900
900
900
When installing the ECK, follow the installation advice below for your own safety:
a) The base where you are going to place your ECK must be flat and provide a perfect seat for your fireplace. The
base must be built using heat resistant materials.
b) The space where the ECK is to be inserted must be free of rubble and waste materials that may catch fire when
the fireplace is working.
c) The inside of the gap where the ECK fireplace is to be installed will be appropriately insulated or built of materials
that resist high temperatures.
d) If insulation must be installed inside the gap, do not cover the ventilation grille.
e) Never wrap the fireplace in insulating material as this will damage it.
36